gps tracker for car

Vehicle GPS tracker VT-360

GPS tracker VT-360 can be used on vehicle tracking, fleet management with extra GPS/GSM antenna, it supports 3 Inputs, 2 Outputs, 1 Analog Input, 1 RS232 port that can make tracker to work with RFID,fuel monitoring,temperature sensor etc

SKU: VT-360 Category:

GPS tracker VT360 is a GPS/GSM/GPRS tracking device specially developed and designed for vehicle real-time tracking and fleet management. With superior GPS and GPRS modules, VT360 has good sensitivity and stable performance. It can get accurate GPS fix even in remote places.It supports 3 Inputs, 2 Outputs, 1 Analog Input, 1 RS232 port that can make tracker to work with RFID, fuel monitoring, temperature sensor etc

 

Feature of vehicle tracking

Track by SMS/GPRS

Tracking by time/distance interval

Reply details street address by SMS

Mileage report

Google link function

Listen-in Function

Inbuilt Motion Sensor for power saving

SOS button for emergency rescue

Geo-fence Alarm/ Movement alarm/over-speed alarm

GPS Blind Area Alarm/ Door alarm/trunk alarm

Main power lost/Low Battery Alarm

Remote engine cut off to stop the car in safe condition

Built‐in 2MB memory & position logging capacity up to 10,000+waypoints even no GPRS signal

Can equip with RFID kit for driver identification and auto Arm/Disarm functions

I/O: 3 Inputs, 2 Outputs, 1 Analog Input, RS232/UART

Crash alarm (optional)

Movement/towed alert, ignition alert, auto cut off engine etc (Optional)

Analog input for Temperature & Fuel sensor detecting/monitoring (optional)

 

Specification of vehicle tracking

Items Specifications
Dimension 75*54*25mm
Weight 123g
Input voltage DC 9V~36V/1.5A
Back-up Battery 650mAh/3.7V
Power Consumption 65mA standby current
Operating Temperature -40°C~75°C
Humidity 5%~95%
Battery Work Time 33 hours in power-saving mode and 8 hours in normal mode
LED 2 LED lights to show GPS, GSM status
Button 1 SOS and 1 power on/off
Microphone Default
Memory 2M Byte
Sensor Motion sensor
GSM Frequency GSM 850/900/1800/1900MHz
GPS Chip Ublox7/Skr
GPS Sensitivity -160dBm
Positioning Accuracy 5meters, CEP

 

Schematic diagram for vehicle GPS tracker

vehicle gps installation

PIN Number Color Description
Input 1/SOS White wire Digital Input 1 (negative triggering), E.g. connect SOS panic button
Input 2 Gray wire Digital Input 2 (negative triggering), E.g. detecting status of Door open/close
Input4 Blue wire Digital Input 4 (positive triggering), E.g. detecting status of ACC on/off
Output 1 Yellow wire E.g. Connect relay to cut off engine or fuel
Output 2 Brown wire E.g. Connect siren
VCC Red wire Positive, DC In (power source). Input voltage: 9V~36V. 12V suggested.
GND Black wire Negative
AD Green wire It can be used to connect with fuel/temperature sensor etc.
Standard accessory

1 GPS Antenna/ 1 GSM Antenna/ 1 Set of Socket Cables/ 1 Microphone/ 1 Manual/ 1 Relay

Optional accessory

RFID reader/tags/ Fuel sensor/ Temperature sensor/ Crash sensor /

 

Online Tracking platform

Admin account login, able to create user account and add devices

Real time Tracking (Google Map/Google Earth)

Location History replay

Send command online to set GPRS Interval, set SOS number, stop/start engine

Movement Reports: Vehicle Stop/Start Report, Engine Idle Report

Mileage calculation

Alarm Reports: SOS alarm, speeding alarm

Multiple Leaving/ Arriving Geo-fencing

Image taken Report

Fuel Monitoring Report

Multiple languages available

 

Simple Steps to Set GPRS Tracking Online

  1. Set ID

Command: W000000,010,ID number

The ID number must same with the ID number from the tracking software you set (GPRS ID)

For example: W000000,010,2012101301

  1. Set APN and APN ser name and password (Set YOUR APN)

Command: W000000,011,APN

For example: W000000,011,CMNET

If the APN has username and password (Your APN Username and Password) please send:

W000000,011,APN,Username,Password

For example: W000000,011,CCDLEN,QIUXIA.21,RX0000

  1. Set IP and port

Command: W000000,012,IP,port

W000000,012,www.ftracking.com,8500 if you use our tracking software, you should send this command.

  1. Enable GPRS Tracking

Command: W000000,013,1

  1. Set GPRS Interval

Command: W000000,014,XXXXX

For example: W000000,014,00001 (the tracker will send GPS data every 10 second)

 

 

Applications

Vehicle Real Time Tracking

Car Security/Anti-Hijack

Fleet management

 

 

Tips:

What is RFID for vehicle tracking?

Each authorized driver takes a RFID inductive card; the card-reader is connected to the tracker via USB cable. When the inductive card is close enough to the car, the card-reader will get the identity (ID) number from the inductive card, and send this ID No. to the server platform via GPRS, and then the administrator can monitor the driver’s ID and his name from platform. Unauthorized driver without RFID inductive card couldn’t turn on the vehicle engine.

When the inductive card held by the driver is far away the car, the tracker will ARM, and it will cut off the oil & Power of the car automatically. Then even if the driver forgets to bring key with him, the car will be armed for anti-theft.When the inductive card is close to the car, the tracker will disarm, and the oil and power of the car will be resumed automatically, then you can drive the car normally.When the tracker in Arm state, tracker will send alarm message both to your phone and to the server platform.

 

How fuel monitoring works?

Tracking device VT-360 support  A/D ports, it means this GPS unit can connect fuel sensors to work. Fix fuel sensor in fuel tank uprightly, ensure part of stainless steel installed in fuel tank totally and the length same as interval height of fuel tank,and then connect wire of fuel sensor to the power supply and tracker. After install the fuel sensor correctly, the tracking unit would send fuel value to tracking platform along with GPS data by GPRS automatically.

 

How to cut off Engine/Oil, immobilize the vehicle?

Connect the relay to the tracker and vehicle according to the manual, then set the following command to enable the output:

Command: W000000,020,P,F

Description: P=1, means output1; P=2, means output2 … P=5, means output5

F=0, to disable this output function; F=1, to enable this output function

SMS send: W000000,020,1,1

If the output1 is connect to oil-cut relay, this command is to enable the engine-cut function, the engine oil pump line will be cut-off to immobilize the vehicle.

While send W000000,020,1,0 is to restore the engine oil pump line and the vehicle can be started again.

Specification

Items Specifications
Dimension 75*54*25mm
Weight 123g
Input voltage DC 9V~36V/1.5A
Back-up Battery 650mAh/3.7V
Power Consumption 65mA standby current
Operating Temperature -40°C~75°C
Humidity 5%~95%
Battery Work Time 33 hours in power-saving mode and 8 hours in normal mode
LED 2 LED lights to show GPS, GSM status
Button 1 SOS and 1 power on/off
Microphone Default
Memory 2M Byte
Sensor Motion sensor
GSM Frequency GSM 850/900/1800/1900MHz
GPS Chip Ublox7/Skr
GPS Sensitivity -160dBm
Positioning Accuracy 5meters, CEP

 

Order Enquiry Form

Contact form description text

  • 1 + 25 =

 

Leave a Reply